Collection: DTF PRESSING INSTRUCTIONS

DTF PRESSING INSTRUCTIONS
  • ~ A heat press in HIGHLY Recommended over an iron

    ~Please note: Since all heat presses vary in terms of temperature and pressure, we recommend you adjust accordingly upon actual use
    (some experimenting may be necessary for optimal results)

    ~Pre-Press garment for 5 seconds (prior to applying image), this step helps remove wrinkles and any potential moisture trapped in the fabric.

    ~REMOVE COLORED BANDS THAT RUN ALONG THE TOP AND BOTTOM OF YOUR SHEETS BEFORE PRESSING AS THEY WILL HEAT TO YOUR GARMENT


    ~1st Press: 300 degrees for 10 seconds heavy pressure with image in proper placement.


    Since this is hot peel film, remove film immediately after pressing

    ~2nd Press: Cover with Teflon at 300 degrees for 10 seconds heavy pressure

    ~Additional Note: Apply firm and even pressure for good adhesion, avoid any obstructions such as pockets, seams, buttons, and zippers within the press area.

    ~REFUNDS- We do not offer refunds for improper pressing