Pre-Designed DTF Transfers

Pressing Instructions

~ A heat press in HIGHLY Recommended over an iron

~Please note: Since all heat presses vary in terms of temperature and pressure, we recommend you adjust accordingly upon actual use
(some experimenting may be necessary for optimal results)

~Pre-Press garment for 5 seconds (prior to applying image), this step helps remove wrinkles and any potential moisture trapped in the fabric.

~REMOVE COLORED BANDS THAT RUN ALONG THE TOP AND BOTTOM OF YOUR SHEETS BEFORE PRESSING AS THEY WILL HEAT TO YOUR GARMENT


~1st Press: 300 degrees for 10 seconds heavy pressure with image in proper placement.


Since this is hot peel film, remove film immediately after pressing

~2nd Press: Cover with Teflon at 300 degrees for 10 seconds heavy pressure

~Additional Note: Apply firm and even pressure for good adhesion, avoid any obstructions such as pockets, seams, buttons, and zippers within the press area.

~REFUNDS- We do not offer refunds for improper pressing

Featured collection